remove thread.joinable

project/modules/.gitignore

@@ -0,0 +1,3 @@
+.tmp_versions
+*.ko.mod
+*.o.cmd

project/modules/Makefile

@@ -0,0 +1,43 @@
+PWD                = $(realpath $(shell pwd))
+MODULE_NAME       ?= $(shell basename "$(PWD)")
+
+ifneq ($(KERNELRELEASE),)
+	# call from kernel build system
+	obj-m := $(MODULE_NAME).o
+else
+	ARCH            ?= aarch64
+	KERNEL_ARCH     ?= arm64
+	CROSS_COMPILE   ?= $(ARCH)-linux-gnu-
+	KVER            ?= $(shell ls "$(PWD)/../../kernel" | grep 'linux-' | sed 's/linux-//')
+	KERNELDIR       ?= $(PWD)/../../kernel/linux-$(KVER)
+	MODDESTDIR      ?= /lib/modules/$(KVER)/kernel/drivers/syso
+
+default:
+	ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) MODULE_NAME=$(MODULE_NAME) $(MAKE) -C $(KERNELDIR) M=$(PWD) modules
+endif
+
+test: $(MODULE_NAME).ko.test
+
+$(MODULE_NAME).ko.test: $(MODULE_NAME).test.o
+	$(CROSS_COMPILE)$(CC) $(LDFLAGS) -pthread $^ -o $@
+
+%.o: %.c
+	$(CROSS_COMPILE)$(CC) $(CPPFLAGS) $(CFLAGS) -c $< -o $@
+
+clean:
+	rm -rf *.ko *.o *.mod.c *~ core .depend .*.cmd .tmp_versions *.symvers *.order
+
+depend .depend dep:
+	$(CROSS_COMPILE)$(CC) $(CFLAGS) -M *.c > .depend
+
+install:
+	install -p -m 644 $(MODULE_NAME).ko $(MODDESTDIR)
+	/sbin/depmod -a ${KVER}
+
+uninstall:
+	rm -f $(MODDESTDIR)/$(MODULE_NAME).ko
+	/sbin/depmod -a ${KVER}
+
+ifeq (.depend,$(wildcard .depend))
+	include .depend
+endif

project/modules/_common/infrared_sensor.def.h

@@ -0,0 +1,4 @@
+static dev_t devno;
+static struct cdev chardev;
+static struct class *chardev_class;
+static struct device *chardev_device[NUMBER_OF_MINOR_DEVICE];

project/modules/_common/infrared_sensor.h

@@ -0,0 +1,82 @@
+MODULE_AUTHOR("Manuel Vögele, Siegfried Kienzle, Simon Wörner");
+MODULE_DESCRIPTION(DEVICE_NAME "driver");
+MODULE_LICENSE("GPL");
+
+static int __init ModInit(void)
+{
+
+    unsigned int i = 0;
+
+    printk(KERN_DEBUG DEVICE_NAME ": init");
+
+    if (alloc_chrdev_region(&devno, 0, NUMBER_OF_MINOR_DEVICE, DEVICE_NAME) < 0)
+        return -EIO;
+
+    cdev_init(&chardev, &fops);
+    chardev.owner = THIS_MODULE;
+    chardev.ops = &fops;
+
+    if (cdev_add(&chardev, devno, NUMBER_OF_MINOR_DEVICE)) {
+        pr_err(DEVICE_NAME ": cdev_add failed.");
+        goto free_device_number;
+    }
+
+    chardev_class = class_create(THIS_MODULE, DEVICE_NAME);
+
+    if (IS_ERR(chardev_class)) {
+        pr_err(DEVICE_NAME ": no udev support\n");
+        goto free_cdev;
+    }
+
+    for (i = 0; i < NUMBER_OF_MINOR_DEVICE; ++i)
+    {
+#if NUMBER_OF_MINOR_DEVICE == 1
+        chardev_device[i] = device_create(chardev_class, NULL, devno + i, NULL, DEVICE_NAME);
+#else
+        chardev_device[i] = device_create(chardev_class, NULL, devno + i, NULL, DEVICE_NAME "%d", i);
+#endif
+
+        if (IS_ERR(chardev_device[i])) {
+            pr_err(DEVICE_NAME ": device create failed\n");
+            goto free_device;
+        }
+    }
+
+#ifdef CUSTOM_INIT
+    CUSTOM_INIT
+#endif
+
+    return 0;
+
+free_device:
+    for (; i > 0; --i) {
+        device_destroy(chardev_class, devno + i - 1);
+    }
+    class_destroy(chardev_class);
+free_cdev:
+    cdev_del(&chardev);
+free_device_number:
+    unregister_chrdev_region(devno, NUMBER_OF_MINOR_DEVICE);
+    return -EIO;
+}
+
+static void __exit ModExit(void)
+{
+    unsigned int i = 0;
+
+    printk(KERN_DEBUG DEVICE_NAME ": exit");
+
+#ifdef CUSTOM_EXIT
+    CUSTOM_EXIT
+#endif
+
+    for (i = NUMBER_OF_MINOR_DEVICE; i > 0; --i) {
+        device_destroy(chardev_class, devno + i - 1);
+    }
+    class_destroy(chardev_class);
+    cdev_del(&chardev);
+    unregister_chrdev_region(devno, NUMBER_OF_MINOR_DEVICE);
+}
+
+module_init( ModInit );
+module_exit( ModExit );

project/modules/infrared_sensor_in_1/.infrared_sensor_in_1.ko.cmd

@@ -0,0 +1 @@
+cmd_/home/sikienzl/git/resy-ss17-grp1/project/modules/infrared_sensor_in_1/infrared_sensor_in_1.ko := aarch64-linux-gnu-ld -EL -r  -T ./scripts/module-common.lds --build-id  -o /home/sikienzl/git/resy-ss17-grp1/project/modules/infrared_sensor_in_1/infrared_sensor_in_1.ko /home/sikienzl/git/resy-ss17-grp1/project/modules/infrared_sensor_in_1/infrared_sensor_in_1.o /home/sikienzl/git/resy-ss17-grp1/project/modules/infrared_sensor_in_1/infrared_sensor_in_1.mod.o ;  true

project/modules/infrared_sensor_in_1/Makefile

@@ -0,0 +1 @@
+../Makefile

project/modules/infrared_sensor_in_1/infrared_sensor_in_1.c

@@ -0,0 +1,77 @@
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/gpio.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+
+#define DEVICE_NAME "infrared_sensor_in_1"
+#define NUMBER_OF_MINOR_DEVICE (1)
+
+#include "../_common/infrared_sensor.def.h"
+
+static unsigned int infrared_sensor_in_1 = 2;
+static unsigned int count = 0;
+
+static int infrared_sensor_open(struct inode *devfile, struct file *instance) 
+{
+	int err;
+
+	err = gpio_request(infrared_sensor_in_1, "rpi-gpio-2");
+	if (err) {
+		printk("gpio_request for in_1 failed %d\n", err);
+		return -1;
+	}
+	err = gpio_direction_input(infrared_sensor_in_1);
+	if (err) {
+		printk("gpio_direction_input for in_1 failed %d\n", err);
+		gpio_free(infrared_sensor_in_1);
+		return -1;
+	}
+	printk("gpio 2 successfull configured\n");
+	return 0;
+
+
+}
+
+
+static ssize_t infrared_sensor_read( struct file *file, char __user *buffer, size_t length, loff_t *offset)
+{
+	unsigned long not_copied;
+	u32 value=0;
+
+
+
+    printk(KERN_DEBUG DEVICE_NAME ": read");
+
+    if (*offset > 0) {
+        return 0;
+    }
+
+    value = gpio_get_value(infrared_sensor_in_1);
+
+    not_copied = copy_to_user(buffer, &value, count);
+    *offset += count - not_copied;
+
+    return count - not_copied;
+}
+
+static int infrared_sensor_close( struct inode *devfile, struct file *instance)
+{
+	printk( "driver_close called\n" );
+	gpio_free( infrared_sensor_in_1 );
+	return 0;
+}
+
+
+static struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = infrared_sensor_open,
+	.release = infrared_sensor_close,
+	.read = infrared_sensor_read,
+};
+
+#include "../_common/infrared_sensor.h";

project/modules/infrared_sensor_in_2/Makefile

@@ -0,0 +1 @@
+../Makefile

project/modules/infrared_sensor_in_2/infrared_sensor_in_2.c

@@ -0,0 +1,77 @@
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/gpio.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+
+#define DEVICE_NAME "infrared_sensor_in_2"
+#define NUMBER_OF_MINOR_DEVICE (1)
+
+#include "../_common/infrared_sensor.def.h"
+
+static unsigned int infrared_sensor_in_2 = 3;
+static unsigned int count = 0;
+
+static int infrared_sensor_open(struct inode *devfile, struct file *instance) 
+{
+	int err;
+
+	err = gpio_request(infrared_sensor_in_2, "rpi-gpio-2");
+	if (err) {
+		printk("gpio_request for in_1 failed %d\n", err);
+		return -1;
+	}
+	err = gpio_direction_input(infrared_sensor_in_2);
+	if (err) {
+		printk("gpio_direction_input for in_1 failed %d\n", err);
+		gpio_free(infrared_sensor_in_2);
+		return -1;
+	}
+	printk("gpio 2 successfull configured\n");
+	return 0;
+
+
+}
+
+
+static ssize_t infrared_sensor_read( struct file *file, char __user *buffer, size_t length, loff_t *offset)
+{
+	unsigned long not_copied;
+	u32 value=0;
+
+
+
+    printk(KERN_DEBUG DEVICE_NAME ": read");
+
+    if (*offset > 0) {
+        return 0;
+    }
+
+    value = gpio_get_value(infrared_sensor_in_2);
+
+    not_copied = copy_to_user(buffer, &value, count);
+    *offset += count - not_copied;
+
+    return count - not_copied;
+}
+
+static int infrared_sensor_close( struct inode *devfile, struct file *instance)
+{
+	printk( "driver_close called\n" );
+	gpio_free( infrared_sensor_in_2 );
+	return 0;
+}
+
+
+static struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = infrared_sensor_open,
+	.release = infrared_sensor_close,
+	.read = infrared_sensor_read,
+};
+
+#include "../_common/infrared_sensor.h";

project/modules/infrared_sensor_in_3/Makefile

@@ -0,0 +1 @@
+../Makefile

project/modules/infrared_sensor_in_3/infrared_sensor_in_3.c

@@ -0,0 +1,77 @@
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/gpio.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+
+#define DEVICE_NAME "infrared_sensor_in_3"
+#define NUMBER_OF_MINOR_DEVICE (1)
+
+#include "../_common/infrared_sensor.def.h"
+
+static unsigned int infrared_sensor_in_3 = 4;
+static unsigned int count = 0;
+
+static int infrared_sensor_open(struct inode *devfile, struct file *instance) 
+{
+	int err;
+
+	err = gpio_request(infrared_sensor_in_3, "rpi-gpio-2");
+	if (err) {
+		printk("gpio_request for in_1 failed %d\n", err);
+		return -1;
+	}
+	err = gpio_direction_input(infrared_sensor_in_3);
+	if (err) {
+		printk("gpio_direction_input for in_1 failed %d\n", err);
+		gpio_free(infrared_sensor_in_3);
+		return -1;
+	}
+	printk("gpio 2 successfull configured\n");
+	return 0;
+
+
+}
+
+
+static ssize_t infrared_sensor_read( struct file *file, char __user *buffer, size_t length, loff_t *offset)
+{
+	unsigned long not_copied;
+	u32 value=0;
+
+
+
+    printk(KERN_DEBUG DEVICE_NAME ": read");
+
+    if (*offset > 0) {
+        return 0;
+    }
+
+    value = gpio_get_value(infrared_sensor_in_3);
+
+    not_copied = copy_to_user(buffer, &value, count);
+    *offset += count - not_copied;
+
+    return count - not_copied;
+}
+
+static int infrared_sensor_close( struct inode *devfile, struct file *instance)
+{
+	printk( "driver_close called\n" );
+	gpio_free( infrared_sensor_in_3 );
+	return 0;
+}
+
+
+static struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = infrared_sensor_open,
+	.release = infrared_sensor_close,
+	.read = infrared_sensor_read,
+};
+
+#include "../_common/infrared_sensor.h";

project/modules/infrared_sensor_in_4/Makefile

@@ -0,0 +1 @@
+../Makefile

project/modules/infrared_sensor_in_4/infrared_sensor_in_4.c

@@ -0,0 +1,76 @@
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/gpio.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+
+#define DEVICE_NAME "infrared_sensor_in_4"
+#define NUMBER_OF_MINOR_DEVICE (1)
+
+#include "../_common/infrared_sensor.def.h"
+
+static unsigned int infrared_sensor_in_4 = 18;
+static unsigned int count = 0;
+
+static int infrared_sensor_open(struct inode *devfile, struct file *instance) 
+{
+	int err;
+
+	err = gpio_request(infrared_sensor_in_4, "rpi-gpio-2");
+	if (err) {
+		printk("gpio_request for in_1 failed %d\n", err);
+		return -1;
+	}
+	err = gpio_direction_input(infrared_sensor_in_4);
+	if (err) {
+		printk("gpio_direction_input for in_1 failed %d\n", err);
+		gpio_free(infrared_sensor_in_4);
+		return -1;
+	}
+	printk("gpio 2 successfull configured\n");
+	return 0;
+
+
+}
+
+static ssize_t infrared_sensor_read( struct file *file, char __user *buffer, size_t length, loff_t *offset)
+{
+	unsigned long not_copied;
+	u32 value=0;
+
+
+
+    printk(KERN_DEBUG DEVICE_NAME ": read");
+
+    if (*offset > 0) {
+        return 0;
+    }
+
+    value = gpio_get_value(infrared_sensor_in_4);
+
+    not_copied = copy_to_user(buffer, &value, count);
+    *offset += count - not_copied;
+
+    return count - not_copied;
+}
+
+static int infrared_sensor_close( struct inode *devfile, struct file *instance)
+{
+	printk( "driver_close called\n" );
+	gpio_free( infrared_sensor_in_4 );
+	return 0;
+}
+
+
+static struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = infrared_sensor_open,
+	.release = infrared_sensor_close,
+	.read = infrared_sensor_read,
+};
+
+#include "../_common/infrared_sensor.h";

project/rfid/MFRC522.h

@@ -0,0 +1,323 @@
+/**
+ * MFRC522.h - Library to use ARDUINO RFID MODULE KIT 13.56 MHZ WITH TAGS SPI W AND R BY COOQROBOT.
+ * Based on code Dr.Leong   ( WWW.B2CQSHOP.COM )
+ * Created by Miguel Balboa (circuitito.com), Jan, 2012.
+ * Rewritten by Søren Thing Andersen (access.thing.dk), fall of 2013 (Translation to English, refactored, comments, anti collision, cascade levels.)
+ * Extended by Tom Clement with functionality to write to sector 0 of UID changeable Mifare cards.
+ * Released into the public domain.
+ * 
+
+
+-- Repurposed to fit Raspberry Pi --- 
+
+ */
+#ifndef MFRC522_h
+#define MFRC522_h
+
+#include <stdint.h>
+#include <stdio.h>
+#include <string>
+using namespace std;
+
+typedef uint8_t byte;
+typedef uint16_t word;
+
+// Firmware data for self-test
+// Reference values based on firmware version; taken from 16.1.1 in spec.
+// Version 1.0
+
+const byte MFRC522_firmware_referenceV1_0[]  = {
+	0x00, 0xC6, 0x37, 0xD5, 0x32, 0xB7, 0x57, 0x5C,
+	0xC2, 0xD8, 0x7C, 0x4D, 0xD9, 0x70, 0xC7, 0x73,
+	0x10, 0xE6, 0xD2, 0xAA, 0x5E, 0xA1, 0x3E, 0x5A,
+	0x14, 0xAF, 0x30, 0x61, 0xC9, 0x70, 0xDB, 0x2E,
+	0x64, 0x22, 0x72, 0xB5, 0xBD, 0x65, 0xF4, 0xEC,
+	0x22, 0xBC, 0xD3, 0x72, 0x35, 0xCD, 0xAA, 0x41,
+	0x1F, 0xA7, 0xF3, 0x53, 0x14, 0xDE, 0x7E, 0x02,
+	0xD9, 0x0F, 0xB5, 0x5E, 0x25, 0x1D, 0x29, 0x79
+};
+
+// Version 2.0
+const byte MFRC522_firmware_referenceV2_0[] = {
+	0x00, 0xEB, 0x66, 0xBA, 0x57, 0xBF, 0x23, 0x95,
+	0xD0, 0xE3, 0x0D, 0x3D, 0x27, 0x89, 0x5C, 0xDE,
+	0x9D, 0x3B, 0xA7, 0x00, 0x21, 0x5B, 0x89, 0x82,
+	0x51, 0x3A, 0xEB, 0x02, 0x0C, 0xA5, 0x00, 0x49,
+	0x7C, 0x84, 0x4D, 0xB3, 0xCC, 0xD2, 0x1B, 0x81,
+	0x5D, 0x48, 0x76, 0xD5, 0x71, 0x61, 0x21, 0xA9,
+	0x86, 0x96, 0x83, 0x38, 0xCF, 0x9D, 0x5B, 0x6D,
+	0xDC, 0x15, 0xBA, 0x3E, 0x7D, 0x95, 0x3B, 0x2F
+};
+
+
+
+class MFRC522 {
+public:
+	// MFRC522 registers. Described in chapter 9 of the datasheet.
+	// When using SPI all addresses are shifted one bit left in the "SPI address byte" (section 8.1.2.3)
+	enum PCD_Register {
+		// Page 0: Command and status
+		//						  0x00			// reserved for future use
+		CommandReg				= 0x01 << 1,	// starts and stops command execution
+		ComIEnReg				= 0x02 << 1,	// enable and disable interrupt request control bits
+		DivIEnReg				= 0x03 << 1,	// enable and disable interrupt request control bits
+		ComIrqReg				= 0x04 << 1,	// interrupt request bits
+		DivIrqReg				= 0x05 << 1,	// interrupt request bits
+		ErrorReg				= 0x06 << 1,	// error bits showing the error status of the last command executed 
+		Status1Reg				= 0x07 << 1,	// communication status bits
+		Status2Reg				= 0x08 << 1,	// receiver and transmitter status bits
+		FIFODataReg				= 0x09 << 1,	// input and output of 64 byte FIFO buffer
+		FIFOLevelReg			= 0x0A << 1,	// number of bytes stored in the FIFO buffer
+		WaterLevelReg			= 0x0B << 1,	// level for FIFO underflow and overflow warning
+		ControlReg				= 0x0C << 1,	// miscellaneous control registers
+		BitFramingReg			= 0x0D << 1,	// adjustments for bit-oriented frames
+		CollReg					= 0x0E << 1,	// bit position of the first bit-collision detected on the RF interface
+		//						  0x0F			// reserved for future use
+		
+		// Page 1: Command
+		// 						  0x10			// reserved for future use
+		ModeReg					= 0x11 << 1,	// defines general modes for transmitting and receiving 
+		TxModeReg				= 0x12 << 1,	// defines transmission data rate and framing
+		RxModeReg				= 0x13 << 1,	// defines reception data rate and framing
+		TxControlReg			= 0x14 << 1,	// controls the logical behavior of the antenna driver pins TX1 and TX2
+		TxASKReg				= 0x15 << 1,	// controls the setting of the transmission modulation
+		TxSelReg				= 0x16 << 1,	// selects the internal sources for the antenna driver
+		RxSelReg				= 0x17 << 1,	// selects internal receiver settings
+		RxThresholdReg			= 0x18 << 1,	// selects thresholds for the bit decoder
+		DemodReg				= 0x19 << 1,	// defines demodulator settings
+		// 						  0x1A			// reserved for future use
+		// 						  0x1B			// reserved for future use
+		MfTxReg					= 0x1C << 1,	// controls some MIFARE communication transmit parameters
+		MfRxReg					= 0x1D << 1,	// controls some MIFARE communication receive parameters
+		// 						  0x1E			// reserved for future use
+		SerialSpeedReg			= 0x1F << 1,	// selects the speed of the serial UART interface
+		
+		// Page 2: Configuration
+		// 						  0x20			// reserved for future use
+		CRCResultRegH			= 0x21 << 1,	// shows the MSB and LSB values of the CRC calculation
+		CRCResultRegL			= 0x22 << 1,
+		// 						  0x23			// reserved for future use
+		ModWidthReg				= 0x24 << 1,	// controls the ModWidth setting?
+		// 						  0x25			// reserved for future use
+		RFCfgReg				= 0x26 << 1,	// configures the receiver gain
+		GsNReg					= 0x27 << 1,	// selects the conductance of the antenna driver pins TX1 and TX2 for modulation 
+		CWGsPReg				= 0x28 << 1,	// defines the conductance of the p-driver output during periods of no modulation
+		ModGsPReg				= 0x29 << 1,	// defines the conductance of the p-driver output during periods of modulation
+		TModeReg				= 0x2A << 1,	// defines settings for the internal timer
+		TPrescalerReg			= 0x2B << 1,	// the lower 8 bits of the TPrescaler value. The 4 high bits are in TModeReg.
+		TReloadRegH				= 0x2C << 1,	// defines the 16-bit timer reload value
+		TReloadRegL				= 0x2D << 1,
+		TCounterValueRegH		= 0x2E << 1,	// shows the 16-bit timer value
+		TCounterValueRegL		= 0x2F << 1,
+		
+		// Page 3: Test Registers
+		// 						  0x30			// reserved for future use
+		TestSel1Reg				= 0x31 << 1,	// general test signal configuration
+		TestSel2Reg				= 0x32 << 1,	// general test signal configuration
+		TestPinEnReg			= 0x33 << 1,	// enables pin output driver on pins D1 to D7
+		TestPinValueReg			= 0x34 << 1,	// defines the values for D1 to D7 when it is used as an I/O bus
+		TestBusReg				= 0x35 << 1,	// shows the status of the internal test bus
+		AutoTestReg				= 0x36 << 1,	// controls the digital self test
+		VersionReg				= 0x37 << 1,	// shows the software version
+		AnalogTestReg			= 0x38 << 1,	// controls the pins AUX1 and AUX2
+		TestDAC1Reg				= 0x39 << 1,	// defines the test value for TestDAC1
+		TestDAC2Reg				= 0x3A << 1,	// defines the test value for TestDAC2
+		TestADCReg				= 0x3B << 1		// shows the value of ADC I and Q channels
+		// 						  0x3C			// reserved for production tests
+		// 						  0x3D			// reserved for production tests
+		// 						  0x3E			// reserved for production tests
+		// 						  0x3F			// reserved for production tests
+	};
+	
+	// MFRC522 commands. Described in chapter 10 of the datasheet.
+	enum PCD_Command {
+		PCD_Idle				= 0x00,		// no action, cancels current command execution
+		PCD_Mem					= 0x01,		// stores 25 bytes into the internal buffer
+		PCD_GenerateRandomID	= 0x02,		// generates a 10-byte random ID number
+		PCD_CalcCRC				= 0x03,		// activates the CRC coprocessor or performs a self test
+		PCD_Transmit			= 0x04,		// transmits data from the FIFO buffer
+		PCD_NoCmdChange			= 0x07,		// no command change, can be used to modify the CommandReg register bits without affecting the command, for example, the PowerDown bit
+		PCD_Receive				= 0x08,		// activates the receiver circuits
+		PCD_Transceive 			= 0x0C,		// transmits data from FIFO buffer to antenna and automatically activates the receiver after transmission
+		PCD_MFAuthent 			= 0x0E,		// performs the MIFARE standard authentication as a reader
+		PCD_SoftReset			= 0x0F		// resets the MFRC522
+	};
+	
+	// MFRC522 RxGain[2:0] masks, defines the receiver's signal voltage gain factor (on the PCD).
+	// Described in 9.3.3.6 / table 98 of the datasheet at http://www.nxp.com/documents/data_sheet/MFRC522.pdf
+	enum PCD_RxGain {
+		RxGain_18dB				= 0x00 << 4,	// 000b - 18 dB, minimum
+		RxGain_23dB				= 0x01 << 4,	// 001b - 23 dB
+		RxGain_18dB_2			= 0x02 << 4,	// 010b - 18 dB, it seems 010b is a duplicate for 000b
+		RxGain_23dB_2			= 0x03 << 4,	// 011b - 23 dB, it seems 011b is a duplicate for 001b
+		RxGain_33dB				= 0x04 << 4,	// 100b - 33 dB, average, and typical default
+		RxGain_38dB				= 0x05 << 4,	// 101b - 38 dB
+		RxGain_43dB				= 0x06 << 4,	// 110b - 43 dB
+		RxGain_48dB				= 0x07 << 4,	// 111b - 48 dB, maximum
+		RxGain_min				= 0x00 << 4,	// 000b - 18 dB, minimum, convenience for RxGain_18dB
+		RxGain_avg				= 0x04 << 4,	// 100b - 33 dB, average, convenience for RxGain_33dB
+		RxGain_max				= 0x07 << 4		// 111b - 48 dB, maximum, convenience for RxGain_48dB
+	};
+	
+	// Commands sent to the PICC.
+	enum PICC_Command {
+		// The commands used by the PCD to manage communication with several PICCs (ISO 14443-3, Type A, section 6.4)
+		PICC_CMD_REQA			= 0x26,		// REQuest command, Type A. Invites PICCs in state IDLE to go to READY and prepare for anticollision or selection. 7 bit frame.
+		PICC_CMD_WUPA			= 0x52,		// Wake-UP command, Type A. Invites PICCs in state IDLE and HALT to go to READY(*) and prepare for anticollision or selection. 7 bit frame.
+		PICC_CMD_CT				= 0x88,		// Cascade Tag. Not really a command, but used during anti collision.
+		PICC_CMD_SEL_CL1		= 0x93,		// Anti collision/Select, Cascade Level 1
+		PICC_CMD_SEL_CL2		= 0x95,		// Anti collision/Select, Cascade Level 2
+		PICC_CMD_SEL_CL3		= 0x97,		// Anti collision/Select, Cascade Level 3
+		PICC_CMD_HLTA			= 0x50,		// HaLT command, Type A. Instructs an ACTIVE PICC to go to state HALT.
+		// The commands used for MIFARE Classic (from http://www.nxp.com/documents/data_sheet/MF1S503x.pdf, Section 9)
+		// Use PCD_MFAuthent to authenticate access to a sector, then use these commands to read/write/modify the blocks on the sector.
+		// The read/write commands can also be used for MIFARE Ultralight.
+		PICC_CMD_MF_AUTH_KEY_A	= 0x60,		// Perform authentication with Key A
+		PICC_CMD_MF_AUTH_KEY_B	= 0x61,		// Perform authentication with Key B
+		PICC_CMD_MF_READ		= 0x30,		// Reads one 16 byte block from the authenticated sector of the PICC. Also used for MIFARE Ultralight.
+		PICC_CMD_MF_WRITE		= 0xA0,		// Writes one 16 byte block to the authenticated sector of the PICC. Called "COMPATIBILITY WRITE" for MIFARE Ultralight.
+		PICC_CMD_MF_DECREMENT	= 0xC0,		// Decrements the contents of a block and stores the result in the internal data register.
+		PICC_CMD_MF_INCREMENT	= 0xC1,		// Increments the contents of a block and stores the result in the internal data register.
+		PICC_CMD_MF_RESTORE		= 0xC2,		// Reads the contents of a block into the internal data register.
+		PICC_CMD_MF_TRANSFER	= 0xB0,		// Writes the contents of the internal data register to a block.
+		// The commands used for MIFARE Ultralight (from http://www.nxp.com/documents/data_sheet/MF0ICU1.pdf, Section 8.6)
+		// The PICC_CMD_MF_READ and PICC_CMD_MF_WRITE can also be used for MIFARE Ultralight.
+		PICC_CMD_UL_WRITE		= 0xA2		// Writes one 4 byte page to the PICC.
+	};
+	
+	// MIFARE constants that does not fit anywhere else
+	enum MIFARE_Misc {
+		MF_ACK					= 0xA,		// The MIFARE Classic uses a 4 bit ACK/NAK. Any other value than 0xA is NAK.
+		MF_KEY_SIZE				= 6			// A Mifare Crypto1 key is 6 bytes.
+	};
+	
+	// PICC types we can detect. Remember to update PICC_GetTypeName() if you add more.
+	enum PICC_Type {
+		PICC_TYPE_UNKNOWN		= 0,
+		PICC_TYPE_ISO_14443_4	= 1,	// PICC compliant with ISO/IEC 14443-4 
+		PICC_TYPE_ISO_18092		= 2, 	// PICC compliant with ISO/IEC 18092 (NFC)
+		PICC_TYPE_MIFARE_MINI	= 3,	// MIFARE Classic protocol, 320 bytes
+		PICC_TYPE_MIFARE_1K		= 4,	// MIFARE Classic protocol, 1KB
+		PICC_TYPE_MIFARE_4K		= 5,	// MIFARE Classic protocol, 4KB
+		PICC_TYPE_MIFARE_UL		= 6,	// MIFARE Ultralight or Ultralight C
+		PICC_TYPE_MIFARE_PLUS	= 7,	// MIFARE Plus
+		PICC_TYPE_TNP3XXX		= 8,	// Only mentioned in NXP AN 10833 MIFARE Type Identification Procedure
+		PICC_TYPE_NOT_COMPLETE	= 255	// SAK indicates UID is not complete.
+	};
+	
+	// Return codes from the functions in this class. Remember to update GetStatusCodeName() if you add more.
+	enum StatusCode {
+		STATUS_OK				= 1,	// Success
+		STATUS_ERROR			= 2,	// Error in communication
+		STATUS_COLLISION		= 3,	// Collission detected
+		STATUS_TIMEOUT			= 4,	// Timeout in communication.
+		STATUS_NO_ROOM			= 5,	// A buffer is not big enough.
+		STATUS_INTERNAL_ERROR	= 6,	// Internal error in the code. Should not happen ;-)
+		STATUS_INVALID			= 7,	// Invalid argument.
+		STATUS_CRC_WRONG		= 8,	// The CRC_A does not match
+		STATUS_MIFARE_NACK		= 9		// A MIFARE PICC responded with NAK.
+	};
+	
+	// A struct used for passing the UID of a PICC.
+	typedef struct {
+		byte		size;			// Number of bytes in the UID. 4, 7 or 10.
+		byte		uidByte[10];
+		byte		sak;			// The SAK (Select acknowledge) byte returned from the PICC after successful selection.
+	} Uid;
+	
+	// A struct used for passing a MIFARE Crypto1 key
+	typedef struct {
+		byte		keyByte[MF_KEY_SIZE];
+	} MIFARE_Key;
+	
+	// Member variables
+	Uid uid;								// Used by PICC_ReadCardSerial().
+	
+	// Size of the MFRC522 FIFO
+	static const byte FIFO_SIZE = 64;		// The FIFO is 64 bytes.
+	
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Functions for setting up the Raspberry Pi
+	/////////////////////////////////////////////////////////////////////////////////////
+	MFRC522();
+	void setSPIConfig();
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Basic interface functions for communicating with the MFRC522
+	/////////////////////////////////////////////////////////////////////////////////////
+	void PCD_WriteRegister(byte reg, byte value);
+	void PCD_WriteRegister(byte reg, byte count, byte *values);
+	byte PCD_ReadRegister(byte reg);
+	void PCD_ReadRegister(byte reg, byte count, byte *values, byte rxAlign = 0);
+	void setBitMask(unsigned char reg, unsigned char mask);
+	void PCD_SetRegisterBitMask(byte reg, byte mask);
+	void PCD_ClearRegisterBitMask(byte reg, byte mask);
+	byte PCD_CalculateCRC(byte *data, byte length, byte *result);
+	
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Functions for manipulating the MFRC522
+	/////////////////////////////////////////////////////////////////////////////////////
+	void PCD_Init();
+	void PCD_Reset();
+	void PCD_AntennaOn();
+	void PCD_AntennaOff();
+	byte PCD_GetAntennaGain();
+	void PCD_SetAntennaGain(byte mask);
+	bool PCD_PerformSelfTest();
+	
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Functions for communicating with PICCs
+	/////////////////////////////////////////////////////////////////////////////////////
+	byte PCD_TransceiveData(byte *sendData, byte sendLen, byte *backData, byte *backLen, byte *validBits = NULL, byte rxAlign = 0, bool checkCRC = false);
+	byte PCD_CommunicateWithPICC(byte command, byte waitIRq, byte *sendData, byte sendLen, byte *backData = NULL, byte *backLen = NULL, byte *validBits = NULL, byte rxAlign = 0, bool checkCRC = false);
+	byte PICC_RequestA(byte *bufferATQA, byte *bufferSize);
+	byte PICC_WakeupA(byte *bufferATQA, byte *bufferSize);
+	byte PICC_REQA_or_WUPA(byte command, byte *bufferATQA, byte *bufferSize);
+	byte PICC_Select(Uid *uid, byte validBits = 0);
+	byte PICC_HaltA();
+	
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Functions for communicating with MIFARE PICCs
+	/////////////////////////////////////////////////////////////////////////////////////
+	byte PCD_Authenticate(byte command, byte blockAddr, MIFARE_Key *key, Uid *uid);
+	void PCD_StopCrypto1();
+	byte MIFARE_Read(byte blockAddr, byte *buffer, byte *bufferSize);
+	byte MIFARE_Write(byte blockAddr, byte *buffer, byte bufferSize);
+	byte MIFARE_Decrement(byte blockAddr, long delta);
+	byte MIFARE_Increment(byte blockAddr, long delta);
+	byte MIFARE_Restore(byte blockAddr);
+	byte MIFARE_Transfer(byte blockAddr);
+	byte MIFARE_Ultralight_Write(byte page, byte *buffer, byte bufferSize);
+	byte MIFARE_GetValue(byte blockAddr, long *value);
+	byte MIFARE_SetValue(byte blockAddr, long value);
+	
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Support functions
+	/////////////////////////////////////////////////////////////////////////////////////
+	byte PCD_MIFARE_Transceive(byte *sendData, byte sendLen, bool acceptTimeout = false);
+	// old function used too much memory, now name moved to flash; if you need char, copy from flash to memory
+	//const char *GetStatusCodeName(byte code);
+	const string GetStatusCodeName(byte code);
+	byte PICC_GetType(byte sak);
+	// old function used too much memory, now name moved to flash; if you need char, copy from flash to memory
+	//const char *PICC_GetTypeName(byte type);
+	const string PICC_GetTypeName(byte type);
+	void PICC_DumpToSerial(Uid *uid);
+	void PICC_DumpMifareClassicToSerial(Uid *uid, byte piccType, MIFARE_Key *key);
+	void PICC_DumpMifareClassicSectorToSerial(Uid *uid, MIFARE_Key *key, byte sector);
+	void PICC_DumpMifareUltralightToSerial();
+	void MIFARE_SetAccessBits(byte *accessBitBuffer, byte g0, byte g1, byte g2, byte g3);
+	bool MIFARE_OpenUidBackdoor(bool logErrors);
+	bool MIFARE_SetUid(byte *newUid, byte uidSize, bool logErrors);
+	bool MIFARE_UnbrickUidSector(bool logErrors);
+	
+	/////////////////////////////////////////////////////////////////////////////////////
+	// Convenience functions - does not add extra functionality
+	/////////////////////////////////////////////////////////////////////////////////////
+	bool PICC_IsNewCardPresent();
+	bool PICC_ReadCardSerial();
+	
+private:
+	byte MIFARE_TwoStepHelper(byte command, byte blockAddr, long data);
+};
+
+#endif

project/rfid/rfid_reader.cpp

@@ -0,0 +1,54 @@
+#include "rfid_reader.hpp"
+#include <unistd.h>
+#include <iostream>
+#include <chrono>
+#include <ctime>
+
+rfid_reader::rfid_reader()
+{
+	mfrc.PCD_Init();	
+	thread = std::thread(&rfid_reader::loop, this);
+}
+
+rfid_reader::~rfid_reader()
+{
+	 stop_thread = true;
+     thread.join();
+}
+
+uint32_t rfid_reader::last_id() const
+{
+	return uid;
+}
+
+void rfid_reader::loop()
+{
+	stop_thread = false;
+	while(!stop_thread)
+	{
+		if(!mfrc.PICC_IsNewCardPresent())
+		{
+			continue;
+		}
+		if(!mfrc.PICC_ReadCardSerial())
+		{
+			continue;
+		}
+		
+
+		uid = int((unsigned char)(mfrc.uid.uidByte[0]) << 24 |
+		      (unsigned char)(mfrc.uid.uidByte[1]) << 16 |
+		      (unsigned char)(mfrc.uid.uidByte[2]) << 8  |
+		      (unsigned char)(mfrc.uid.uidByte[3]));
+
+#ifndef NDEBUG
+		printf("\n");
+		std::time_t result = std::time(nullptr);
+		std::cout << std::asctime(std::localtime(&result));
+		printf("%X\n", last_id());
+#endif
+
+		std::this_thread::sleep_for(1s);
+
+	}
+}

project/rfid/rfid_reader.hpp

@@ -0,0 +1,27 @@
+#ifndef RFIDREADER_HPP_
+#define RFIDREADER_HPP_
+
+#include <cstdint>
+#include <thread>
+
+#include "MFRC522.h"
+
+class rfid_reader
+{
+public:
+	uint32_t last_id() const;
+	rfid_reader();
+	rfid_reader(const rfid_reader &) = delete;
+	rfid_reader(const rfid_reader &&) = delete;
+	~rfid_reader();
+	void loop();
+private:
+	MFRC522 mfrc;
+	uint32_t uid;
+	std::thread thread;
+	bool stop_thread;
+};
+
+
+
+#endif

project/spi/information.txt

@@ -0,0 +1,5 @@
+How to enable the SPI Interface:
+
+edit /boot/config.txt 
+
+add line dtparam=spi=on